Autonomous script

automation/scripts/root_pixel.sh is the repo’s headless rooting pipeline. It runs Magisk’s own on-device patcher (assets/boot_patch.sh, extracted from the Magisk APK) over adb shell

• exactly what the app’s “Install → Select and Patch a File” button does - so the whole flow is scriptable.

Prereqs: the bootloader is already unlocked (a one-time, on-device, device-wiping step - see Root with Magisk), and adb, fastboot, unzip, curl, and apksigner/keytool are on PATH.

Start here - brand-new device, just plugged in

If you literally just connected a fresh Pixel, do these once first (they need physical taps and the unlock factory-wipes the phone - no script can do them for you). Then the one autonomous command below does the rest.

1. Get the repo + host tools on your computer. Open a terminal:

   1 2 3 4 5

   git clone https://github.com/cpeoples/dvma && cd dvma # then run all commands from here # Install Android platform-tools (adb/fastboot) + verify tools: # macOS: brew install --cask android-platform-tools && brew install openjdk # keytool # Linux: sudo apt-get install -y android-sdk-platform-tools android-sdk-build-tools default-jdk adb version && fastboot --version # confirm they're on PATH

2. On the phone - enable Developer options + the two toggles. Settings → About phone → tap Build number 7×. Then Settings → System → Developer options → turn ON USB debugging and OEM unlocking.

3. Authorize this computer. With the phone plugged in:

   1 2	adb devices # unlock the phone screen and tap "Allow USB debugging" # (tick "Always allow from this computer"). It must show: <serial> device

4. Unlock the bootloader (this ERASES the phone - back up first).

   1 2 3

   adb reboot bootloader fastboot flashing unlock # confirm ON THE PHONE with the volume/power keys fastboot reboot # let it boot + finish setup once, then re-enable USB debugging

Now you’re “unlocked + authorized” and the autonomous command below will run end-to-end.

Which Pixel? This is hand-verified on the Pixel 8a (akita) and Pixel 6a (bluejay), but the script auto-detects the root partition from the factory image, so it works across the whole line - Pixel 6/6a (boot) and Pixel 7/8/9/10/11 and up (init_boot). See Root with Magisk for the partition rule.

Fully autonomous (unlocked + authorized device)

Once the four steps above are done (or on any already-unlocked, already-authorized device), this one command fetches everything, patches, and flashes with no manual steps in between - just run it from the repo root:

1
2

# Auto-fetch Magisk + the exact matching factory image, patch, then flash:
automation/scripts/root_pixel.sh --fetch-magisk --fetch-image --flash --yes

What happens when you run it: it auto-selects your connected device, detects its exact build, downloads + verifies Magisk and the matching factory image, patches the boot image on-device, then flashes it. On some Pixels you may get one on-screen “confirm” during flash - tap it.

You’ll see Failed to patch a few times - that’s normal, not an error. Those lines come from Magisk’s own magiskboot trying its Samsung-only kernel patches (RKP / defex / PROCA). A Pixel’s Tensor kernel doesn’t contain those patterns, so they’re skipped. Success is confirmed by the script reporting new-boot.img produced right after - which it prints explicitly.

The last step is Magisk’s own one-time enablement, and it’s GUI-gated by design. After the reboot the script installs the full Magisk app for you (so you’re not asked to “download full Magisk”), then guides you through Magisk’s two one-time taps. topjohnwu ships no CLI to pre-authorize these, so on a first root they’re the only interaction:

1. If Magisk shows “Requires additional setup”, tap OK - it runs its environment setup and reboots itself.
2. Open Magisk → Superuser tab → turn ON the switch for [SharedUID] Shell (com.android.shell). That’s what actually lets the ADB shell get root - until it’s on, Magisk silently rejects su (no popup).

The script then persists the grant (root_access=Apps and ADB + an allow policy for UID 2000) so every later run is fully zero-touch - root survives reboots with no taps. Verify anytime with adb shell su -c id (expect uid=0(root)).

Want it hands-free? Add --auto-finalize and the script will attempt both taps for you via on-device UI automation (uiautomator + input tap):

1	automation/scripts/root_pixel.sh --fetch-magisk --fetch-image --flash --yes --auto-finalize

It locates controls structurally - by Magisk’s own view ids (com.topjohnwu.magisk:id/…) and the non-localized package name com.android.shell, then taps the switch nearest that row - so it isn’t tied to screen coordinates or the UI language. It’s still best-effort: if a future Magisk changes those ids/layout it can’t match, in which case it prints the two manual steps above and waits. It never writes anything extra; it only taps the same controls you would.

Nervous about the destructive step? Drop --flash --yes and add --boot-test (next section) to do a no-write dry run first, or keep --flash without --yes to get a typed FLASH confirmation prompt before it writes.

• --fetch-magisk downloads the Magisk APK from the official GitHub releases and verifies the signer certificate (pinned to topjohnwu’s key) before using it.
• --fetch-image detects the device’s EXACT build, downloads the matching Google factory image (via the Flash Tool API - works for any Pixel), verifies its SHA-256 prefix, and extracts the correct partition (init_boot for 8a, boot for 6a).
• --flash is the only switch that writes to a partition. Without it the script is non-destructive (produces ./magisk_patched.img and stops).
• --yes skips the typed confirmation for unattended/fleet runs.

Safer dry run (fetch + patch, no write)

1
2

# Fetch + patch, then TEMPORARILY boot from RAM to sanity-check root (writes nothing):
automation/scripts/root_pixel.sh --fetch-magisk --fetch-image --boot-test

Classic patch-only (you supply both inputs)

1
2
3

automation/scripts/root_pixel.sh --apk Magisk-v30.7.apk --image init_boot.img         # Pixel 8a
automation/scripts/root_pixel.sh --apk Magisk-v30.7.apk --image boot.img --boot-test  # Pixel 6a
# -> writes ./magisk_patched.img; then flash it yourself (right partition per device).

Flags

Where do downloads go?

By default the Magisk APK and factory image live in a temp dir that’s deleted on exit - so a repeat run re-downloads the (multi-GB) factory image. Pass --keep-downloads[=DIR] to keep them in a persistent cache (default ./dvma-downloads); on later runs the script reuses the cached factory image if its SHA-256 prefix still verifies (no re-download) and resumes an interrupted transfer. The patched image is written to --out (default ./magisk_patched.img). Those paths are git-ignored so you can’t accidentally commit device-specific images.

Tip while iterating: run with --keep-downloads so you only download the ~3-4 GB factory image once, even across multiple attempts.

What can’t be zero-touch

Hardware/OS policy makes three steps require a physical touch (no script can do them): the bootloader unlock (volume-key confirm + factory wipe), the first USB-debugging authorization (“Allow?” tap), and, on some Pixels, an on-screen confirm for fastboot boot/flash. So the realistic ceiling is one-tap enroll, then fully unattended.

If a flash leaves the device unbootable, see Recover a bricked device →.